- Heavy-Duty Commercial Grade Outdoor Light Strings

Options available for our outdoor string lights:  

 
Click on pictures to view larger versions

Features:

• These popular commercial-grade outdoor light strings are ideal for landscape lighting for backyards, wineries, patios, cafes and wedding tents.
• These outdoor party string lights have 16 gauge (AWG) wire, medium base sockets and spacing of 24" between sockets.
• PVC encapsulated sockets are resistant to UV sunlight exposure.
• Soft socket lips are designed to ensure a tight weather-resistant seal around the bulbs.
• These outdoor string lights are designed for both indoor (interior) and outdoor (exterior) use. Most of our customers use these products for outdoor landscape lighting.
• The 54 ft. and 106 ft. light strings come with a male power plug; power plug for the 330 ft. light string must be purchased separately. We recommend the UL listed 15 Amp rubber plugs.
• As seen on the DIY Network show "Yard Crashers" (Episode "Backyard Living Room")
• As featured in the July 2009 issue of Real Simple Magazine

Recommended medium base light bulbs (sold separately):

• LED S14 bulbs (.96 Watts)
• LED G50 bulbs(.96 Watts)
• 11S14 light bulbs (11 Watts)
• A15 light bulbs (15 Watts)
• G50 globe bulbs(15 Watts)

Wattage Capacity:

• The recommended maximum run per circuit for these light strings is approximately 960 Watts (8 Amps); limit of 15 Watts per socket. This means that for a continuous length of light string, the maximum wattage running through should be 960 Watts or less. For example: for the 106 foot light string, since there are 50 sockets, recommended wattage per socket would be 15 Watts per socket (960W ÷ 50 sockets). If you plan to use all 50 sockets, we recommend the LED S14 or LED G50 (.96W), 11S14 (11W), A15 (15W) or the G50 (15W) bulbs.

Please note that these light strings are not designed to be end-to-end connectable.

Light bulbs sold separately.

Suspensor Option: The black and green indoor/outdoor party light strings come with an option of with suspensor or without suspensor. The suspensor provides an eyelet for cable wires to go through to provide additional support to hold up the string lights. In addition, the socket and the main wire are connected by a suspensor, which lowers the socket approximately 1 inch to help provide better illumination. To the right are close-up pictures of the light string socket with suspensor.

 
Click on pictures to view larger versions

Without Suspensor: Main wire goes directly into the socket - there is no eyelet for a supporting cable and no suspensor hanging the socket lower.

 Looking for Globe Party Light Strings? Click here.
 Looking for LED string lights? Click here.